Discovery 2 Bcm

Land Rover Discovery BCU Cloning Service

Professional BCU (Body Control Unit) cloning and data transfer service for Land Rover Discovery vehicles fitted with YWC000010 and similar Body Control Units.

At Phillips AutoTech, we can transfer the essential vehicle data from your original BCU to a replacement unit, allowing the donor module to operate correctly with your vehicle’s existing immobiliser, central locking, and security systems.

This service is ideal when the original unit has become faulty, suffered water damage, developed internal electrical faults, or when a replacement module has been sourced and requires the original vehicle information transferring across.

What Is A BCU?

The Body Control Unit (BCU) is a key control module within the vehicle and is responsible for managing a range of comfort, security, and immobiliser functions.

Because the BCU stores vehicle-specific information, replacement units cannot normally be installed directly without transferring the original data.

What Is Included?

• Immobiliser information
• Security data
• Vehicle configuration settings
• Central locking data
• Original module information
• Vehicle-specific programming

Once completed, the replacement BCU can normally be installed directly into the vehicle with the original vehicle information retained.

Common Fault Symptoms

• Vehicle not starting
• Immobiliser faults
• Central locking issues
• Alarm system faults
• Communication errors
• Water damaged BCU
• Intermittent electrical faults
• No communication with diagnostic equipment

Important Information

• Mail-in service only — no physical item supplied
• Original and replacement BCU required
• Matching part numbers are strongly recommended
• YWC000010 and equivalent units supported
• Modules should be packaged securely before shipping
• Fast turnaround available on most services

In many cases we can recover and transfer the required data even when the original unit has no communication through diagnostic equipment.

Following successful cloning, the vehicle will retain its original immobiliser information, central locking functions, and vehicle configuration data.

Compatibility Check

It is extremely important that the replacement unit matches the original module. If you are unsure whether your BCU is suitable for cloning, please contact Phillips AutoTech with clear photos or part numbers from both units before purchasing and we will be happy to confirm compatibility.